SSP 520 automatic proline

THE MOST EFFICIENT POWER PACK FROM THE PROFESSIONAL LEAGUE OF CUTTING SPLITTERS

  • // Most recent CAN-Bus PLC control with high expandability (e.g.: remote maintenance module in connection with GPS)
  • // Optimized cabling, very maintenance-friendly
  • // Load-sensing hydraulics with power-controlled axial piston pump
  • // Completely load-independent proportional valve block for sensitive consumer control
  • // Reduced heat generation
  • // Optimized efficiency
  • // Higher efficiency with reduced energy demand at the same time

Types

Article No. Type Drive Weight*
SSP-M52-1 SSP 520 automatic pro E E-motor 30 kW / 400V 63 ampere
connection power (stationary machine)
5.800 kg
SSP-M52-2 SSP 520 automatic pro D Hatz Diesel engine 34,2 kW (stationary
machine)
6.100 kg

** Weight without belt conveyor and feeder trestle

Specifications

Type SSP 520 automatic pro
Splitting force 30 t
Log length 25 - 50 cm
Log diameter 15 - 52 cm
Splitting cycles 6 / min *
Control fully automatic

* Cycles per minute / depends mainly on wood type

Equipment

Article No. Feeding Systems E D
SSZ-ZAL-61 Feeder trestle 2 m, hydraulic folding, with log deposit
SSZ-ZAL-04 Hydraulic feeder trestle 2 m, stationary, with log deposit
SSZ-ZAL-05 Feeder trestle 3 m (4 hydraulically driven star-shape rollers), stationaryr
SSZ-ZAL-06 Low level height coupling (ca. 450 mm coupling height, for 3-point crane)
SSZ-ZAL-07 Hydraulics preparation for cross conveyor integration
       
  SPLITTING KNIVES E D
SSZ-ZAL-18 2-4-6 / 18 sections knives frame proline -system
SSZ-ZAL-19 Metric scale on proline - knives system
       
  BELT CONVEYOR E D
SSZ-ZAL-21 Feeding conveyor 4,6 m, hydr. extendable, belt width 120 cm (only with shavings separator)
SSZ-ZAL-22 Transfer chute from belt conveyor exit to packing station (only with belt conveyor)
SSZ-ZAL-23 Manual cable winch for discharge conveyor
SSZ-ZAL-24 Hydraulic cable winch for discharge conveyor
SSZ-ZAL-26 Hydraulic supply preparation for external packing machine
       
  SHAVINGS SEPARATOR E D
SSZ-ZAL-27 Log chute behind splitting unit (only without belt conveyor)
SSZ-ZAL-28 Shavings separator without end flap (only with belt conveyor)
SSZ-ZAL-29 Shavings separator with end flap (only without belt conveyor)
SSZ-ZAL-30 Automatic shavings discharge
SSZ-ZAL-31 Shavings suction with hydraulic drive (splitter hydraulics)
       
  AXLES/CHASSIS    
SSZ-ZAL-32 Stationary base
SSZ-ZAL-33 Trailer axle without brake
SSZ-ZAL-35 Chassis for 25 km/h incl. equipment, pressure air and lighting system
SSZ-ZAL-56 Hydraulic leg support with tractor hydraulics (for axle or chassis)
SSZ-ZAL-64 Equipment for 40 km/h (axle, brakes, spring-loaded axle)
SSZ-ZAL-37 Type approval for 25 km/h
 
● standard    ○ optional    - not available
   

Additional equipment

Article No. Additional equipment E D
SSZ-ZAL-39 Electric throttle control -
SSZ-ZAL-40 Oil cooler
SSZ-ZAL-43 Saw chain replacement, 89 driving links (for 2,0 mm rail, chain design 4-0-4)
SSZ-ZAL-47 Harvester sword replacement 75 cm, 2,0 mm rail
SSZ-ZAL-49 Starter set: 1 x sword, 3 x chain, 1 x limit switch, 1 x filter kit
SSZ-ZAL-53 Service kit for Hatz engine 3 cylinders: 2x oil filters, 2x fuel filters -
SSZ-ZAL-55 Operator training
  ● standard    ○ optional    - not available    

Download

Všechny informace o produktu si můžete stáhnout zde.

Stáhnout

Poptávky

Potřebujete informace k produktu nebo chcete připravit nabídku?

poptávky

Jdi zpět

Nechte si zasílat informace

Rádi Vám budeme zasílat náš newsletter s aktuálními novinkami.

Jaký je součet 3 a 3?

Fillmannsbach 9
St. Georgen am Fillmannsbach
A - 5144 Austria / Österreich

T:  +43 7748 8620
F:  +43 7748 8620-20
Contacts

Mon - Thu: 08:00 - 17:00
Fri: 08:00 - 12:30
Sat / Sun: closed



© 2020 Binderberger Maschinenbau GmbH