- // Most recent CAN-Bus PLC control with high expandability (e.g.: remote maintenance module in connection with GPS)
- // Optimized cabling, very maintenance-friendly
- // Load-sensing hydraulics with power-controlled axial piston pump
- // Completely load-independent proportional valve block for sensitive consumer control
- // Reduced heat generation
- // Optimized efficiency
- // Higher efficiency with reduced energy demand at the same time
SSP 520 automatic proline

THE MOST EFFICIENT POWER PACK FROM THE PROFESSIONAL LEAGUE OF CUTTING SPLITTERS
Types
Article No. | Type | Drive | Weight* |
---|---|---|---|
SSP-M52-1 | SSP 520 automatic pro E | E-motor 30 kW / 400V 63 ampere connection power (stationary machine) |
5.800 kg |
SSP-M52-2 | SSP 520 automatic pro D | Hatz Diesel engine 34,2 kW (stationary machine) |
6.100 kg |
** Weight without belt conveyor and feeder trestle
Specifications
Type | SSP 520 automatic pro |
---|---|
Splitting force | 30 t |
Log length | 25 - 50 cm |
Log diameter | 15 - 52 cm |
Splitting cycles | 6 / min * |
Control | fully automatic |
* Cycles per minute / depends mainly on wood type
Equipment
Article No. | Feeding Systems | E | D | |
---|---|---|---|---|
SSZ-ZAL-61 | Feeder trestle 2 m, hydraulic folding, with log deposit | ○ | ○ | |
SSZ-ZAL-04 | Hydraulic feeder trestle 2 m, stationary, with log deposit | ○ | ○ | |
SSZ-ZAL-05 | Feeder trestle 3 m (4 hydraulically driven star-shape rollers), stationaryr | ○ | ○ | |
SSZ-ZAL-06 | Low level height coupling (ca. 450 mm coupling height, for 3-point crane) | ○ | ○ | |
SSZ-ZAL-07 | Hydraulics preparation for cross conveyor integration | ○ | ○ | |
SPLITTING KNIVES | E | D | ||
SSZ-ZAL-18 | 2-4-6 / 18 sections knives frame proline -system | ● | ● | |
SSZ-ZAL-19 | Metric scale on proline - knives system | ● | ● | |
BELT CONVEYOR | E | D | ||
SSZ-ZAL-21 | Feeding conveyor 4,6 m, hydr. extendable, belt width 120 cm (only with shavings separator) | ○ | ○ | |
SSZ-ZAL-22 | Transfer chute from belt conveyor exit to packing station (only with belt conveyor) | ○ | ○ | |
SSZ-ZAL-23 | Manual cable winch for discharge conveyor | ● | ● | |
SSZ-ZAL-24 | Hydraulic cable winch for discharge conveyor | ○ | ○ | |
SSZ-ZAL-26 | Hydraulic supply preparation for external packing machine | ○ | ○ | |
SHAVINGS SEPARATOR | E | D | ||
SSZ-ZAL-27 | Log chute behind splitting unit (only without belt conveyor) | ● | ● | |
SSZ-ZAL-28 | Shavings separator without end flap (only with belt conveyor) | ○ | ○ | |
SSZ-ZAL-29 | Shavings separator with end flap (only without belt conveyor) | ○ | ○ | |
SSZ-ZAL-30 | Automatic shavings discharge | ○ | ○ | |
SSZ-ZAL-31 | Shavings suction with hydraulic drive (splitter hydraulics) | ○ | ○ | |
AXLES/CHASSIS | ||||
SSZ-ZAL-32 | Stationary base | ● | ● | |
SSZ-ZAL-33 | Trailer axle without brake | ○ | ○ | |
SSZ-ZAL-35 | Chassis for 25 km/h incl. equipment, pressure air and lighting system | ○ | ○ | |
SSZ-ZAL-56 | Hydraulic leg support with tractor hydraulics (for axle or chassis) | ○ | ○ | |
SSZ-ZAL-64 | Equipment for 40 km/h (axle, brakes, spring-loaded axle) | ○ | ○ | |
SSZ-ZAL-37 | Type approval for 25 km/h | ○ | ○ | |
|
Additional equipment
Article No. | Additional equipment | E | D |
---|---|---|---|
SSZ-ZAL-39 | Electric throttle control | - | ● |
SSZ-ZAL-40 | Oil cooler | ● | ● |
SSZ-ZAL-43 | Saw chain replacement, 89 driving links (for 2,0 mm rail, chain design 4-0-4) | ○ | ○ |
SSZ-ZAL-47 | Harvester sword replacement 75 cm, 2,0 mm rail | ○ | ○ |
SSZ-ZAL-49 | Starter set: 1 x sword, 3 x chain, 1 x limit switch, 1 x filter kit | ● | ● |
SSZ-ZAL-53 | Service kit for Hatz engine 3 cylinders: 2x oil filters, 2x fuel filters | - | ○ |
SSZ-ZAL-55 | Operator training | ○ | ○ |
● standard ○ optional - not available |